METAL FORMING MACHINE

ROOF SHEET CORRUGATING MACHINES

Technical parameters:
1) Material spec: colored steel sheet, galvanized steel sheet;
2) Thickness of coil sheet: 0.4 - 0.8mm.
3) Main motor power: 4kW;
4) Forming speed: 10 - 16m/min;
5) Hydraulic station power: 3kW.

6) Quantity of stands: 11---14 groups;
7) Hydraulic pressure: 10 - 12Mpa;
8) Controlling system: PLC.
9) Index error of length: 10m - 2mm;
10) Total weight: about 3700kg.
11) Voltage: 380V 3 phase 60Hz or at buyer's requirement;
12）Material Widely: 1200mm
Material of main equipment:
1) Roller material: high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm.
2) Active shaft material: high grade No.45 carbon wrought steel at diameter 70mm
3) Cutter blade: Cr12 mould steel with quenched treatment, Glazed steel stamping blade: Cr12
4) the panel surface no scratch;
5)Frequency converter adopt ABB.
6)PLC: Computer adopt PLC, Mitsubishi FX-IS series.
7)Computer operating board adopt OP320A, China.

Forming Machines
Usage: purlin manufacturing
Purlin roll-forming line Model GMTZ220

MAIN TECHNIQUE DATA:
(1) Coil Width: about 300mm; (2) Suitable Coil Thickness: 2.0-3.0mm;
(3) Suitable Raw Materials: galvanized steel coil.(4) Yield strength: ≤235Mpa;
(5) Roll forming step: About 13 steps; (6) Material of rollers: GCr15
(7) Power: 380V/50HZ

MACHINE COMPONENTS:
(1) Un-coiler, 1 set（5tons）；(2) Guiding device，1 set；(3) Levelering and feeding，1 set。
(4) Roll-Forming M/C，1 set；(5) Cutting device，5 sets。
(6) Product Rack (un-powered)，1 set (two parts, total length is 6 meters)。
(7) Hydraulic system，1 set。(8) PLC Control System，1 set。